|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours |
| Warranty: | One Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Nominal diameter | DN15-DN2000 | |||||||||
| Accuracy | ± 0.5% | |||||||||
| Measurement range | 0-15m/s (flow velocity) | |||||||||
| conductivity | > 20 µS/cm | |||||||||
| Medium temperature | -40 ºC -+80 ºC | |||||||||
| Nominal pressure | 0.6, 1.0, 1.6, 4.0 Mpa | |||||||||
| Electrode materials | 316L, Hastelloy , titanium, tantalum | |||||||||
| Lining materials | Chloroprene rubber, polyurethane ,polytetrafluoroethylene, F46, PFA, ceramic | |||||||||
| Power supply | 220VAC 48-63Hz, 24VDC,3.6VDC battery | |||||||||
| Power consumption | <15W | |||||||||
| Output signal | 4-20mA , 0-10mA , Pulse 0.001L-1m3 | |||||||||
| Display and buttons | English | |||||||||
| Instantaneous flow and accumulated flow | ||||||||||
| Four membrane touch switches for setting | ||||||||||
| Protection class | IP65 IP67 | |||||||||
| Explosion-proof mark | Ex d ia [ia Ga] q IIC T6 Gb | |||||||||
| Selection of lining materials | |||||||
| PTFE / F4 | Performance 1. Suitable for boiling hydrochloric acid, sulfuric acid, nitric acid, and aqua regia, as well as concentrated alkali and various organic solvents. Not suitable for corrosion by chlorine trifluoride, high-temperature oxygen trifluoride, high flow rate liquid fluorine, liquid oxygen, and ozone. 2. Poor wear resistance. 3. Poor ability to resist negative pressure. Application 1.100 ºC, 150 ºC (special order) 2. Strong corrosive media such as concentrated acid and alkali 3. Sanitary media |
||||||
| Polyurethane | Performance 1. Has excellent wear resistance (equivalent to ten times that of natural rubber) 2. Poor acid and alkaline resistance 3. Cannot be used for water mixed with organic solvents Application 1.<80ºC 2. Neutral and strongly worn slurry Coal slurry, mud, etc |
||||||
| Neoprene | Performance 1. It has excellent elasticity, high tensile strength, and good wear resistance 2. Resistant to corrosion in general low concentration acid, alkali, and salt media, but not resistant to corrosion in oxidizing media Application 1.80 ºC, 120 ºC (special order) 2. General water, sewage, weakly abrasive mud, and slurry |
||||||
| PFA | Performance 1. Suitable for boiling hydrochloric acid, sulfuric acid, nitric acid, and aqua regia, as well as concentrated alkali and various organic solvents. Not suitable for corrosion by chlorine trifluoride, high-temperature oxygen trifluoride, high flow rate liquid fluorine, liquid oxygen, and ozone. 2. Poor wear resistance. 3. It has a very strong ability to resist negative pressure. Application 1.100 ºC, 150 ºC (special order) 2. Strong corrosive media such as concentrated acid and alkali 3. Sanitary media |
||||||
| Polyvinyliden fluoride / F46 | Performance 1. Suitable for boiling hydrochloric acid, sulfuric acid, nitric acid, and aqua regia, as well as concentrated alkali and various organic solvents. Not suitable for corrosion by chlorine trifluoride, high-temperature oxygen trifluoride, high flow rate liquid fluorine, liquid oxygen, and ozone. 2. Poor wear resistance. 3. Strong anti negative pressure ability. Application 1.100 ºC, 150 ºC (special order) 2. Strong corrosive media such as concentrated acid and alkali 3. Sanitary media |
||||||
| Model | Nominal Diameter DN | |||||||||
| CEF-10 | 10 | |||||||||
| CEF-15 | 15 | |||||||||
| CEF-20 | 20 | |||||||||
| CEF-25 | 25 | |||||||||
| CEF-32 | 32 | |||||||||
| CEF-40 | 40 | |||||||||
| CEF-50 | 50 | |||||||||
| CEF-65 | 65 | |||||||||
| CEF-80 | 80 | |||||||||
| CEF-100 | 100 | |||||||||
| CEF-125 | 125 | |||||||||
| CEF-150 | 150 | |||||||||
| CEF-200 | 200 | |||||||||
| CEF-250 | 250 | |||||||||
| CEF-300 | 300 | |||||||||
| CEF-350 | 350 | |||||||||
| CEF-400 | 400 | |||||||||
| CEF-450 | 450 | |||||||||
| CEF-500 | 500 | |||||||||
| CEF-600 | 600 | |||||||||
| CEF-700 | 700 | |||||||||
| CEF-800 | 800 | |||||||||
| CEF-900 | 900 | |||||||||
| CEF-1000 | 1000 | |||||||||
| CEF-1200 | 1200 | |||||||||
| CEF-1400 | 1400 | |||||||||
| CEF-1600 | 1600 | |||||||||
| CEF-1800 | 1800 | |||||||||
| CEF-1800 | 2000 | |||||||||
| Nominal pressure MPa | ||||||||||
| 06 | 0.6MPa | |||||||||
| 10 | 1.0MPa | |||||||||
| 16 | 16MPa | |||||||||
| 40 | 40MPa | |||||||||
| Process connection | ||||||||||
| P1 | Flange GB/T 9119-2000 | |||||||||
| P2 | Thread | |||||||||
| Temperature rating | ||||||||||
| T1 | ≤60ºC(CR/PU) | |||||||||
| T2 | ≤120ºC(F4/F46) | |||||||||
| T3 | ≤150ºC(PFA) | |||||||||
| Body material | ||||||||||
| MC | Carbon steel | |||||||||
| M4 | 304 stainless steel | |||||||||
| M6 | 316 stainless steel | |||||||||
| Lining material | ||||||||||
| L1 | Neoprene (CR) | |||||||||
| L2 | Polyurethane (PU) | |||||||||
| L3 | PTFE (F4) | |||||||||
| L4 | Polyvinylidene fluoride F46 | |||||||||
| L5 | PFA | |||||||||
| Electrode material | ||||||||||
| E1 | 316 stainless steel | |||||||||
| E2 | Hastelloy B | |||||||||
| E3 | Hastelloy C | |||||||||
| E4 | Titanium (Ti) | |||||||||
| E5 | Tantalum (Ta) | |||||||||
| E1 | platinum-iridium alloy | |||||||||
| Grounding | ||||||||||
| G1 | Grounding ring , 316 | |||||||||
| G2 | Grounding electrode | |||||||||
| G3 | Grounding screw | |||||||||
| Converter | ||||||||||
| C1 | L-mag 411B ( Integrated type ) | |||||||||
| C2 | L-mag 211B ( Remote type ) | |||||||||
| Accuracy | ||||||||||
| A1 | 1.0% | |||||||||
| A2 | 0.5% | |||||||||
| Signal output | ||||||||||
| S4 | 4-20mA | |||||||||
| S1 | Pulse output | |||||||||
| Communication protocol | ||||||||||
| CH | HART | |||||||||
| CR | RS485 | |||||||||
| Power supply | ||||||||||
| D4 | 24V DC | |||||||||
| A2 | 220VAC | |||||||||
| B1 | Lithium battery | |||||||||
| Power supply | ||||||||||
| D1 | LCD for instantaneous and cumulative flow | |||||||||
| D0 | No display | |||||||||
| Protection grade | ||||||||||
| P5 | IP65 | |||||||||
| P6 | IP67 | |||||||||
| P8 | IP68 | |||||||||
){kind=link}